Video answer: How often should i drain my spa and add fresh water?
Top best answers to the question «Our blog when should i change my spa water»
How often should I change the water in my spa? As a rule, you should change the water in spas containing 700L to 4000L on average every 3-4 months for an average user and sooner for heavy users. An average user would use their spa 2-3 times a week. A heavy user would use their spa 4-5 days per week.
Video answer: Why is my spa draining when i turn off my pool pump?
10 other answers
Master Spas advises that you change the water every six months. However, Master Spas customers have been able to maintain the water quality for longer periods of time. It will depend on how often you use it, who is using the swim spa, and where it is located. If I have a dual temperature unit, do you treat both sides with chemicals?
How to change the water in your spa or swim spa - Our Blog How to change the water in your spa or swim spa
Your spa cover is more than an attractive accessory. It’s also has the very important job of holding in heat when your spa is not in use, helping to reduce energy consumption and keep energy costs low.The cover also prevents excess evaporation, helping you conserve water, and it prevents debris and objects that could clog your hot tub filters from falling into the spa.
While the water is still cold, you should add approx. 100ML of Prevent II to eliminate and prevent staining and scale formation. Once the water is hot (wait at least 5 hours) you should use a test strip to check your water is balanced correctly.
A spa filter cartridge won't last forever, and each cleaning reduces its efficacy a little bit more. After about 15 cleanings, replace the spa filter and you'll notice an immediate improvement in water clarity. Depending on how much the spa is used and how much is asked of the filter, you should replace the spa filter every 12-24 months.
For tackling green spa water, first test the water with test strips to see where the total hardness, total chlorine or bromine, pH, alkalinity, and free chlorine levels are. If you use a bromine system, make sure you’re testing for that, too. This is how you know what to adjust.
Chlorine demand of water too high up start up, after holidays or due to excess contamination or neglect. Shock dose with chlorine (see start up dose on product instructions). Repeat after 24 hours if necessary. Cloudy water. Poor chemical control or inadequate filtration.
The function of the Check Valve is to stop water from doing what it naturally does when the pool turns off, which is to flow in the direction of least resist...
We would recommend setting the spa at 25°C to 35°C and then before using moving the temperature up to 40°C if desired. As Lay-Z-Spa heaters are thermostatically regulated and will only switch on to top up the temperature of the water to whatever temperature that you set.
Blog Our blog is a collection of stories, research, and other info you may find useful. In the world of water treatment, there are tons of resources out there, so we hope to help you filter out some of the noise.