Jacquard silk colors how to use?
Content
Top best answers to the question «Jacquard silk colors how to use»
Jacquard Silk Colors flow freely on silk fabric. ... Remember that colors will appear darker when wet.
- Pour a small amount of each color you are planning to use into plastic cups or an ice cube tray…
- Dip your brush gently into a color…
- Let dry 24 hours before setting with Jacquard Permanent Dyeset Concentrate or steaming.
9 other answers
Although Jacquard Silk Colors are available in 20 shades, most colors of the spectrum may be mixed from three primary colors: yellow, magenta and cyan. The dyes are concentrated. Using the colors full strength will yield the brightest shades. For lighter colors or pastels, the dyes can be mixed with water. If your water is hard, use distilled water.
Jacquard’s Silk Colors are liquid dyes used primarily for direct application silk painting. The range consists of 20 intermixable colors—the essential rudiments for an infinite palette of vivid hues. Unlike European silk colors (which tend to be liquid acid dyes), Jacquard’s Silk Colors are modified fiber-reactive dyes.
Although Jacquard Silk Colors are available in 20 shades, most colors of the the spectrum may be mixed from three primary colors: yellow, magenta and cyan. For pastels, the dyes can be mixed with water. If your water is hard, use distilled water. Remember that colors will appear darker when wet. Always work wet to wet. Never go over a dry area.
Jacquard Acid Dyes for Silk Painting: For professional silk painters who steam set, liquid acid dyes provide the brightest, most intense colours in the world. To make your own liquid acid dyes for silk painting, use the following recipe: Add 8oz. (1 cup) of very hot water to one 5oz jar of Jacquard Acid Dye powder.
Jacquard Dye-Na-Flow Textile and Silk Paint - YouTube.
This video shows how Jacquard's Discharge Paste can be used to remove color from fabric and how Jacquard's Dye-Na-Flow can be used to re-color discharged are...
Applied straight from the bottle, the color is semi-transparent and intense. Add up to 25% water to this medium-bodied paint to increase transparency and reduce viscosity, or mix with #100 Colorless Extender to achieve any degree of transparency without affecting the consistency of the paint. Mix with #123 White for pastels.
On tightly stretched fabric, paint several colors, adjacent to each other and overlapping to make nice blends of colors, then, immediately, while it is still wet, sprinkle on whichever size of salt crystal you want to experiment with.
Let the silk soak in the dye bath for at 12-24 hours. I've found this increases color intensity AND helps with exhausting the dye.